THE BREECH-LOADING RIFLE
From 1857 breech-loading rifles began to appear experimentally in the British Army. These, the first military breechloaders since the Ferguson rifle, were in fact all carbines and were issued for trial to certain cavalry regiments. There were four different patterns: the Terry and the Westley Richards, which were of British design, and the Sharps And the Greene, which were American.
The Terry carbine was made by the firm of Callisher & Terry of Birmingham and 28 Norfolk Street, London. It was a new firm, for it was only established in 1855, and the mechanism invented by the junior partner was patented in 1856. It is of particular interest in that it introduced into the British Army the bolt action, which was later to become almost universal for non-automatic military rifles. The Terry bolt had a coned head which fitted into the correspondingly shaped rear end of the chamber. The bolt was opened by a hinged handle, fitted at its rear end, which was pulled, outwards to withdraw it. When the bolt was closed part of the handle filled up the loading aperture. The bolt was held in position by rear locking lugs (foreshadowing later British practice) which bore against shoulders on the standing breech.
The Terry was of the type known as a ‘capping breechloader’. That is to say, the cartridge used with it contained only the charge of powder and the bullet, the detonating mixture being contained in a separate percussion cap. The Terry cartridge was made of nitrated paper and had a wad of greased felt behind the powder charge and attached to the base. After the discharge of the cartridge this wad remained in the breech and the following round was loaded behind it. After the next shot it was thrust forward in front of the bullet, cleaning and greasing the barrel.
The Terry carbine was a very successful weapon. It was purchased extensively by the Confederacy during the American Civil war and was known as the ‘door bolt’ breech-loader. The famous Confederate cavalry leader General Jeb Stuart had one.
The American Sharps carbine was a much earlier design, having been invented by Christian Sharps in 1848. Its most noteworthy .feature was a ‘falling’ breech block. This opened vertically when actuated by a trigger guard, hinged to move forwards and downwards; but it also fell open when the carbine was held muzzle down. The cartridge case was made of treated linen; and the breech block had a sharp forward edge which, as the block was closed, sliced off the end of this case to expose the powder. The linen was consumed on the explosion of the charge. The first models had separate percussion caps, but the later ones, including those supplied to the British Government, were fitted with the Maynard tape primer, which was rather similar to the strip of caps made for toy pistols, and which was invented by an American dentist. (It almost seems as if Maynard was more interested in ammunition than he was in teeth, for in 1856 he patented a metallic cartridge with an expanding case.)
The Sharps carbine had an interesting, if somewhat disreputable, history in the years before the outbreak of the American Civil war. The admission of Kansas as a State of the Union was the occasion of a bitter struggle between those who wished to see slave labour introduced and those who were opposed to it. In Massachusetts the New England Emigrant Aid Company was formed to send settlers to Kansas who were opposed to slavery. Many of these were established in the Kansas town of Lawrence, and here armed clashes occurred with slave-state supporters from Missouri. Considerable damage was done in Lawrence both to the homes of the settlers and the public buildings. In revenge the famous, or infamous, John Brown (depending on one’s point of view), in company with a small body of settlers and four of his own sons, seized five of the principal advocates of the slavery movement and killed them. The New England Emigrant Aid Company had supplied the settlers with Sharps carbines-, and a further twenty-five were presented on behalf of the Congregational Church of Plymouth, Massachusetts, by its minister, the Reverend Henry Ward Beecher. From this latter source of supply the Sharps carbines acquired the colloquial name of `Beecher’s Bibles’.
In 1859 John Brown, in command of a motley detachment of eighteen men, including his sons, his brother-in-law and six negroes, seized the Federal Arsenal at Harper’s Ferry, Virginia. Armed with Beecher’s Bibles they then held off attacks by the local militia, until finally forced to surrender by Colonel Robert E. Lee in command of a small force of Marines. John Brown was hanged, but his name has been immortalized in a great Union song which has become one of the most rousing military marches of all time. The far greater man who captured him was to become the brilliant leader in the field of the forces which John Brown had opposed. In the meantime, amongst the relics of this episode is a Sharps ‘Beecher’s Bible’ carbine on which is engraved the name ‘John Brown Jr. .
The Greene, the other American carbine, had an entirely fixed breech and a barrel which rotated and moved forward for loading. The breech and the barrel’were locked’ together by lugs. The principle was not a new one, and the Greene does not seem to have been favourably received; for although 2000 were bought it appears that many were never issued.
The Westley Richards carbine was made by the famous-firm, the early history of which has already been given. As stated in Chapter X111, Westley Richards succeeded his father in 1855, and the name of the firm became Westley Richards & Company. Three years later he patented his capping breech-loader carbine. The mechanism of this, though rather complicated, was the most efficient of the four carbines. The breech was opened and closed by means of a long arm, the forward part of which was hinged to the rear of the barrel. When the breech was closed the rear end of the arm rested in a recess cut along the top of the small of the butt. Raising the arm vertically opened the breech. Attached to the under part of this arm was an elongated plunger, at the forward end of which was a brass breech plug. When closed, the rear end of the plunger butted against an iron shoe, which held it in position against the breech pressure. The plunger had a little free movement ‘fore and aft’ on the arm to ease the action of opening and closing. From its distinctive arm the Westley Richards acquire the nickname of ‘Monkey-Tail’. The cartridge was the same as that used with-the Terry carbine.
The Westley Richards was far the most successful of the four carbines under trial, and in 1861 it was approved as the firearm for the cavalry of the Army. Even when n the Snider was approved for all arms of the Regular Army, it was not entirely displaced; for it was issued to the Yeomanry and was the ‘Standard carbine of the second-line cavalry for many’ years. Abroad the Portuguese Government took a fancy to it and adopted it for use in the army.
Although the cavalry now had a breech-loading rifled firearm, the rest of the Army was equipped with the muzzle-loading Enfield, or (in the case of the Royal Engineers) Lancaster. Breech-loaders were, however, already a commonplace amongst sporting weapons, and it was clear that the muzzle-loader was obsolescent. Several foreign armies were now equipped or partially equipped with breech-loading rifles. Although the American Civil war had been mostly fought with muzzle-loaders, many units in the Union armies had been equipped with Sharps rifles, and several other makes were in use on both sides. On the continent of Europe the Prussian Army had adopted the bolt-action needle gun in 1848, and its superiority over the weapons of opposing armies was evident. in the wars against Denmark in 1864 and Austria in 1866.
In 1864, therefore, a Select Committee was appointed to consider the equipment of the whole Army with breech-loaders, and to study designs for this purpose. The Committee decided that the only practicable method of doing this quickly was to select a mechanism which would permit the conversion of the Army’s large stock of comparatively new muzzle-loading Enfields. Conversion could only be regarded as an interim measure, but it was considered that the selection of the best type of breech-loading rifle for the Army was of less urgency than the provision of some form of breech-loader.
The breech-loading mechanism which was chosen by the Committee was designed by Jacob Snider of New York. The breech was closed by a block which was hinged laterally on the right, and fitted into a recess behind the barrel. To open the breech a thumb piece was pressed which caused the block to swing over to the right. At first it was intended that the Enfield cartridge with its separate cap should be used, and the cap holder and ignition hole formed part of the block.
This was not, however, a very satisfactory answer, for it introduced certain weaknesses. It was decided, therefore, to use a cartridge which incorporated its own detonator. The original Enfield lock and hammer were still retained, but in. place of the nipple the block was pierced obliquely for a striker, the head of which protruded in the part of the block which had been occupied by the nipple. A centre-fire cartridge was adopted, and a claw extractor was fitted to the breech mechanism. This pulled the cartridge case partially out when the breech was opened, and it was then thrown clear by turning the .rifle upside down.
The first cartridge used had a cartridge paper body and a brass base. This was disappointing, and finally the brass-bodied cartridge devised by Colonel Boxer was adopted. This final development took place in 1.867; but in the meantime issue to the troops of the Snider-Enfield, already modified to take a centre-fire cartridge, had started in 1865.
The story of the self-contained cartridge is interesting. The first one seems to have been produced by the inventive Genevan gunsmith of Paris, Jean Samuel Pauly, whose invention of a pellet detonator in 1812 was mentioned in Chapter X. Some time between 1812 and 1815 Pauly produced a centre-fire paper cartridge, affixed to the base of which was a metal rosette containing the detonating mixture. The paper cartridge cannot have been very satisfactory, for shortly afterwards he tried a brass cartridge. The brass, however, was too thick and heavy for the casing t6 expand sufficiently to make a gas-tight seal.
It seems likely that little was required to make a success of Pauly’s invention; and yet, surprisingly, nothing further was apparently attempted for another fifteen years. In 1831 Moser, a foreign engineer, took out a British patent for a muzzle-loader which had a needle-fire cartridge. In 1836 rem Dreyse, a Prussian gunsmith. who had worked under Pauly, produced a breech-loading needle gun; and this was the bolt-action weapon which was adopted by the Prussian Army in 1848. The cartridge was made of combustible paper, and a pellet of fulminate was inserted between the powder charge and the bullet. Fitted to the bolt was a long needle-like striker which penetrated the base of the cartridge and went forward through the powder to pierce the doonator. Though successful in action, the needle gun was a dirty weapon. The needle got badly corroded and the breech became blocked with fouling.
The next major development was the invention by a Frenchman named Houillier, in 1846, of the pin-fire cartridge. The casing was made of thick coiled paper with a base of copper or brass. - Protruding at right angles from the side of the cartridge case, and at the base end where the wall was of metal, Was a pin. This pin was struck by a hammer, which drove it into a detonator inside the cartridge. The following year another Frenchman, Flobert, produced the first rim-fire cartridge. The principle of this has been explained in Chapter XIV, and it differs little from the rim-fire cartridges which are used to-day; chiefly for -22 calibre weapons.
In 185z Lancaster, who, it will be remembered, designed the muzzle-loading rifle which had been adopted for the Royal Engineers, brought out a breech-loading rifle which took a centre-fire cartridge of his own design. Inside the cartridge case, and a short distance from the base, was a perforated metal disc. Between this disc and the base was the detonating mixture: base, disc and detonator forming a sandwich. When the striker hit the base, it was indented, compressing the detonator and causing an explosion. The flash from the detonator passed through the perforations of the disc to the powder charge. The success of the Lancaster cartridge led to the adoption of a centre-fire cartridge for the Snider,
Some years previously, probably about 1839, another Frenchman, Pottet, invented a tapered expanding cartridge made of rolled paper with a metal base. In the centre of the base there was an aperture, and on the inner side of this was fixed a chamber containing a detonator, and having a small hole communicating with the powder charge. In 1857 Pottet patented his invention, but there was apparently no machinery available to manufacture it and hand manufacture would have been too expensive.
Yet another Frenchman, F. E. Schneider of Paris, patented an improved version of the Pottet cartridge, and this was introduced into England by the gunmaking firm of Witton and Daw (the successors to George H. Daw). This was the centre-fire cartridge which was selected for the Snider-Enfield. As has already-been said, it was not a complete success. The problem was then tackled by Colonel Boxer, Superintendent of the Royal Laboratory at Woolwich, with the result that he produced his very successful modification of 1867-
The Boxer cartridge hadacase made of thin sheet brass, coiled and covered with paper, and mounted on a separate base which was a disc, first of brass and later of iron. The hollow rivet which secured the cylinder to the base was the cap chamber. Oddly enough the Boxer principle was subsequently adopted by the United States of America, whilst the present bottlenecked type of cartridge now used in the British Army originated in the 187o design of Colonel Hiram Berdan of the United States Ordnance. Department.
The immediate requirements of the Army having been provided for, consideration was now given to the type of breech-loading rifle which should replace the Snider-Enfield. Eventually,.in 1871, the Martini-Henry was selected. This rifle combined the falling breech mechanism invented by an Austrian, von Martini, and the rifled barrel with seven grooves which had been designed by an Edinburgh gunsmith named Alexander Henry.
The Martini breech mechanism consisted of a block which was hinged at its rear end, and in which was a coiled spring to actuate the striker. Behind the trigger guard was a lever, which, when it was pulled down, lowered the front end of the block to uncover the breech, extracted and ejected the cartridge case, and cocked the striker. The loaded cartridge was then inserted by hand into the chamber. In its simplicity and efficiency the Martini action is one of the best that has ever been designed, and it is still the most popular for small-bore competition shooting. From a military point of view, however, it suffered from two very serious defects. Firstly, sand was liable to jam the mechanism, and this gave great trouble in the Egyptian campaign of 1882. Secondly, it was a single-shot weapon, and it was therefore doomed once the demand for magazine rifles arose.
Another defect in the Martini-Henry was Henry’s barrel. The grooves of the rifling were deep and square cut, with the result that fouling lodged in them very readily. The bore was smaller than that of the Snider-Enfield, being only -450 instead of -577.- In spite of this the Snider-Enfield was the pleasanter weapon to fire, for the Martini-Henry had a vicious kick of a recoil.
After some experimental models had been tested in 1972, the Martini-Henry Mark I was issued to the troops in 1874. The Mark II of 1876 and the Mark III of 1879 embodied minor modifications. In 1886 a Committee, convened as a result of the troubles experienced in the Egyptian campaign, recommended certain. improvements in the rifle, including a bore of ‘402- Some experimental models were made, known as the Enfield Martini; but as magazine rifles were already under investigation nothing came of them, and they were converted to Martini-Henrys of the normal pattern and designated Mark IV.
A great student of the science of rifling, William Ellis Metford, was born in Taunton in 1824. He became a civil engineer, and at an early age worked under the famous Isambard Kingdom Brunel on the construction of the Great Western Railway. Later he went to India as a railway engineer, but returned to England when his never very robust health broke down.
Metford had been interested in shooting both in practice and theory from his youth, and after he had been forced to give up his Indian career he had more time to devote to this hobby. From notes which he has left it is apparent that he was carrying out experimental work on rifles at least as early as i85o; and in 1852 he was firing rifles at i2oo yards’ range in pursuance of his experiments. By 1854 he was satisfied that, contrary to the general belief, the expansion of a bullet into the rifling -occurred immediately after the explosion of the charge and before it started to move forward. He also discovered that the explosion caused a rifle barrel to bend, so that when the bullet left the muzzle the barrel was pointing in a slightly different direction to the original point of aim.
Metford evolved a most ingenious method of testing his theories. He fired bullets into a long box filled with sawdust, and was thus able to recover them in the condition in which they had left the barrel of the rifle. From subsequent examination it was possible to tell whether there had been any leakage of explosion gases past a bullet, and the manner in which it had taken the rifling. From such experiments Met-ford found that the common practice of constructing very deep grooving in a rifled barrel was unnecessary, and that a longitudinal bullet with a good bearing surface would not strip, or ride over, the lands even when the grooves were very shallow. He also found that the generally held theory that a bullet must be made of pure .lead to be soft enough to be expanded by the explosion into the grooves was incorrect; and that, on the contrary, a much harder bullet of lead and an alloy would do.
Metford next constructed a rifle and bullets in accordance with his ideas. The grooves were only a few thousands of an inch deep, and the lead and alloy bullet had a shallow hollow ire the base and was protected from friction by a thin paper wrapping. A great friend of Metford’s, Colonel Halford, had his own private range at Wistow in Leicestershire. Here experiments were carried out with the new rifle. They were sufficiently successful for Metford to have a special rifle made in 1865 for match shooting. This had seven grooves of a depth of four-thousandths of an inch. Armed with this weapon, a muzzle-loader, Halford, entered the-competition held by the Cambridge University Long Range Club, which included practices at i 000 and i i oo yards. To the astonishment of the many critics-of the design, Halford won the cup presented for the best score on the two days’ shoot.
Metford’s ideas had come to stay, and they were soon being copied by all gunsmiths. For military rifles, unfortunately, Henry’s barrel had been adopted before the implications of Metford’s success had been really appreciated. In due course his rifling replaced Henry’s in the weapon of the British soldier, but before this happened there was a new development in bullet design. The bore of the Martini-Henry rifle, even though considerably smaller than that of the Snider-Enfield, was still very large. A reduction in the size of the bore would allow a smaller cartridge, and this in turn would result in the soldier being able to carry a greater quantity of ammunition in his personal equipment: an important consideration in view of the increased rate of fire which would be possible with the advent of the magazine rifle. With the existing muzzle velocity of the bullet, however, its size, which was dictated by the military requirement for stopping power, could not be reduced any further. If the velocity could be increased the same stopping.power could be obtained with a smaller bullet, but the lead bullets then used were too soft to be propelled at a faster rate down the barrel. The difficulty was solved by a Swiss, Colonel Rubin, who found that if the lead bullet was encased in a covering of a harder metal it would stand up to much greater velocities.
As a result of Colonel Rubin’s discovery the calibre of British Army rifles was reduced to -303 inch in 1888, and this is still the standard for all full-bore bolt-action rifles. The increased velocity was at first obtained by using a charge of compressed black powder. In the meantime a Committee was established under the presidency of Frederick Abel, an expert in the manufacture of explosives, to devise a smokeless propellent. A solution was found in a preparation based on the discoveries of the great Swiss engineer, Alfred Nobel. It was hardened into a long cord and given the name ‘cordite’. From 1892 it was used in all Service small arms ammunition. Cordite increased the velocity of the bullet from the i 800 feet per second of the compressed black powder charge, to 2000 feet per second. This was further increased to 2440 feet per second in 1911 when a still lighter pointed bullet was adopted.
The new rifle which was introduced into the British Army in 1888 was the Lee-Metford. It had Metford’s design of rifled barrel with the ‘303-inch calibre, and a bolt-action breech and magazine, both invented by a Scottish watchmaker named James Paris Lee. Lee’s bolt is a development of the breech mechanism which had’ first appeared in the Prussian needle gun of 1848 and subsequently in the French Chassepot of 18 66. The Lee action is still in use in the British Army, and is only now, some seventy years after its first introduction, being replaced by a semi-automatic mechanism.
The function of the bolt, briefly, is to push the cartridge into the breech, close the breech, fire the cartridge, and extract and eject the empty case. The cartridge is fired by a pin which is held back by a spring inside the bolt, and which projects through a hole in the bolt-head when the pressure of the trigger releases the spring. The Lee bolt was strongly criticized by leading British gunsmiths because it is held in position when closed by lugs at the rear of the bolt. Whereas, theoretically, in order that the minimum amount of metal should be under stress at the time of firing, front locking lugs should be used, as in the German Mauser and the. American Garand. However, the Lee rear locking lugs permit the use of a separate bolt-head, which facilitates cleaning and adjustment. Moreover, the Lee action is the fastest bolt-action ever to have been devised, and its retention in the Army after the Boer war and the two World Wars is a testament to its efficiency in action.
The Lee magazine is a separate box which is inserted under the breech mechanism and held in place by a spring clip. Inside is a platform which is pushed upwards from below by a spring in the base of the box. The cartridges are inserted on top of the platform and press it downwards, so compressing the spring. As one cartridge ‘is pushed forward by the bolt from the magazine, so the spring pushes another one upwards into place. The first magazine held eight rounds of the black powder ammunition. This was increased to ten rounds when the cordite ammunition was introduced.
From 18 go a number of the Martini action rifles were given the Metford barrel instead of the Henry. These conversions were known as Martini-Metfords. Between 1891 and 1892 a large number of the Martini-Henry Cavalry carbines and. Artillery carbines were similarly converted.
In x895 the Metford barrel was modified at Enfield by reducing the number of grooves in the rifling from seven to five. The new rifle was called the Lee-Enfield. Further rifle and carbine conversions from the Martini-Henrys received this barrel and became Martin i-En fields.
No bolt-action carbines were made until 1896, when a magazine Lee-Enfield Cavalry carbine was produced. All Artillery carbines, however, continued to have the single-shot Martini action. In addition, Colonial troops at the start of the Boer war were armed with the Martini-Enfield, and the Indian Army was equipped with it until i goS.
At the time the retention of single-shot weapons did not appear as such a disadvantage as it would now; for the magazine was regarded as a reserve, and the rifle was fitted with a cut-out which slid across the magazine so that it could be cut off from the chamber. This was the normal position for firing, the rifle being reloaded by hand with a single round after each . shot. It was probably considered that ammunition supply in the field would present difficulties if the high rate of fire, which the magazine made possible, were used too freely. The comparative effectiveness of the new magazine rifles was demonstrated, however, at the battle of Omdurman. The British troops opened fire on -the charging dervishes at a range of 2000 yards and stopped them Soo yards from their position. The Egyptian and Sudanese troops, who had Martini-Henrys, opened fire at moo yards and stopped them 300 yards away.
The limited use of the magazine was found to be a handicap in the. Boer war. Once the reserve of rapid fire had been used there was no means of re-charging the magazines quickly. Lee had, indeed, invented a charger in 1892 by means of which five rounds could be loaded simultaneously. This was not considered necessary at the time but was eventually adopted as a result of the lessons of the Boer war.
The Boer war showed that fire power by mounted troops was at least as important as shock action, and the Martini carbine, with which most of the cavalry were armed, was a very ineffective weapon compared with the magazine Lee-Enfield of the mounted infantry. After the war it was therefore decided that carbines should be abolished and that there should be one pattern of rifle for the whole Army. In order to make it suitable for use by mounted troops the Lee-Enfield was reduced in length and entitled the Short Magazine Lee-Enfield (known to generations of soldiers as the S.M.L.E.). In compensation the bayonet was slightly lengthened.
Ferguson, in the meantime,, had been promoted Major and brevet Lieutenant-Colonel, and put in command of the ‘American Volunteers’, a corps of loyalists from New York and New Jersey and armed with the Ferguson rifle antique slovakia ceramics vase . The unit sailed with the expedition commanded by Sir Henry Clinton and Was present at the siege and capture of Charleston antique pembroke tble . Ferguson was then made a Brigadier-General of the Loyal Carolina Militia, and with his own corps of about ioo men as a nucleus marched into the interior, collecting loyalist recruits on the way square brass dial . On the 7th October 178o, his camp at King’s Mountain, close to the border of North Carolina, was surprised by a large force of mountaineers under the command of General Shelby value of hand painted wales china tea set . The training of Ferguson’s men did not match their enthusiasm, and after a gallant defence the majority of them were either killed or captured john widdicomb china cabinets . Ferguson himself was amongst the former 17th century imported oriental cabinet .
With the death of its inventor, the destruction of his rifle units and the capture of their armament, the Ferguson rifle disappeared from the Army antique paper mache card table . Beautifully made models for sportsmen were, however, made for many years afterwards photos of victorian sofa with zebra pattern fabric .
There is an interesting contemporary account of the manufacture of Ferguson rifles table lamps . A Mr berkey & gay american empire furniture . William Clincher records in his diary of 1776 that he visited Birmingham and waited upon Mr edmund etling glass bird . Baskerville who showed him his gun factory belgian gothic revival cabinet . He described this as follows:
‘ The Gun manufactory is pretty; the forging, scraping, and boreing, pleas’d me much;—The Rifle Guns are handsome pretty pieces, 800 are nearly finish’d on government account, at three pounds three shillings each; A Gentleman, with one of them at a distance of i So yards, shot a Ball six times out of eight within the circumference of the crown of my hat: at 400 yards he shot within half a yard of the mark antique brass table with animal legs .
EIGHTEENTH-CENTURY GUNMAKERS
The number of gunmakers in Great Britain during the eighteenth century was very considerable antique drop leaf table with leaf built in . Those of them who made military arms could be roughly divided into selmersheim .
(a) Makers under contract to the Government to supply either complete weapons or component parts arabesque vertical plate racks .
(b) Establishments which made firearms of Government pattern which were subsequently purchased for the Army middle east antique collectors .
(c) Makers of firearms designed for military use, but not of a Government pattern art deco dining table . These were primarily intended for purchase by officers, and might be of the particular gunsmith’s own design, or one in common private use chippendale knife boxes octagon .
Some of them engaged in two, or even all three, of these activities; and, in addition, made sporting arms as well regency ironstone marks blue . To name all the gunsmiths making military arms would entail the compilation of a fairly lengthy catalogue expensive antique furniture chests . It will suffice to give a few typical examples antique gaming table claw feet .
I louis xvi revival sideboard with porcelain inlays . Clarkson, who flourished as a gunsmith from m 1680 to 1730, made flintlock muskets and holster pistols for the Army under Government contract antique early american drop-leaf butterfly table . In addition, he made the box-lock type of pistol which was introduced in the reign of Queen Anne wooton chest . The lock of this pistol, instead of being mounted on one side plate with a counter-plate on the other side of the weapon to support it, had a plate on top- joined to one on each side to form a metal box lacquered furniture . The cock, flash-pan and steel were mounted on the top plate telescopic table pedestal . The barrel was the cannon-shaped screw-on type, with breech-loading gateleg table with drawers and drop leaf . This box-lock was to be popular for over loo years painted silver trays . In later years Clarkson made some breech-loading holster pistols, the mechanism of which was of the screw-plug arrangement from which the Ferguson breech was derived “table george iv” .
John Hawkins conducted a business in London from 168o to 1714, which was carried on by his son to 176o, and his grandson to 1776 epergne antique for sale . His particular speciality was a flintlock holster pistol which had a brass barrel with a bell muzzle robinson and leadbeater figure . ‘It is of interest that George Washington had a pair of these pistols which were made by the second Hawkins 18th century walnut-veneered and oak chest of seven drawers .
Another founder of two further generations of gunsmiths was James Freeman of London, the business lasting from 1705 to 1782 art deco english suburban house . Freeman also made box-lock pistols, and, in addition, muskets and holster pistols under Government contract luxury antique items .
In Scotland for most of the eighteenth century there were a number of gunsmiths of the name of Murdoch engaged in making all-metal flintlock pistols wallendorf candelabras . Two of them, father and son and both christened James, had a shop in Inverness barker brothers coffee table for sale . Some of those made by the father had the lobe-shaped butt, and he differed from his son in chasing the whole of the barrel century hepplewhite walnut card table . The pistols made by the younger James have only the muzzle chased 18 century wooden novelty pipes .
Thomas Murdoch worked at Leith, and made pistols with both lobe and ram’s-horn butts wrought iron church candle sticks . In the museum of the Royal United Service Institution are two pistols with rain’s-horn butts which have ‘To: Murdoch’ engraved on the lock plate german 1940s furniture styles . They were picked up on the battlefield of Culloden british designers dining table . They are a beautiful pair and must have been the pride of some gallant Jacobite of the ‘Forty-five sutherland drop leaf table . One wonders what happened to their owner, and if the pistols were found where he had hurled them empty at the stolid English infantry shagreen knife box .
John Murdoch had a shop at Doune french neoclassical tables . His pistols have ram’s-horn butts, acorn triggers, and are sometimes ornamented with gilt brass stock and butt 4 foot wide walnut drop leaf table . Major John Pitcairn, who commanded the British advanced guard at Lexington on the 19th April 1775, had a pair of these pistols kotahya pottery . It is supposed that with one of them Pitcairn fired the first shot of the American War of Independence mason patent ironstone china . In the struggle which followed he lost his pistols, which were subsequently picked up and given to General Rufus Putnam british antique wardrobes . Putnam carried them for the remainder of the war, and they are now at the Lexington museum nesting tea tables .
One other Murdoch made pistols in Edinburgh with the lobe-shaped butt fall-front chest of drawers .
Joseph Farmer of London was in business from 1718 to 176,2 how to repair veneer table on couch . He had a Government contract to make standard flintlock muskets and also short flintlock muskets fitted with grenade cups for the Grenadiers bureau de coene art deco . One of these latter is in the Museum of the Royal United Service Institution 19th century glass fronted cabinet . The inscription ‘Farmer 1744′ is placed vertically on the lock plate behind the cock adjustable silver candlesticks . This method of discharging a grenade was revived in the First World War, and survived to become a
standard Army weapon wardrobe of a 17th century lady . Farmer also made a double-barrelled I version of the box-lock pistol antique chamber cabinets .
Bidet, who emigrated from France, practised as a gunsmith in London from 17-21 to- 1731 antiques with plain legs . He did not make military weapons, but a sporting rifle he produced had a breech mechanism which is an obvious forerunner of Ferguson’s idea inlaid marble table lapis lazuli antique . The trigger guard was a lever turning a screw plug; but in this case the plug came right out and had a single thread harlequin painted bar . The action was therefore much slower than Ferguson’s, and the return of the plug to its seating might well be difficult in the heat of battle “perspectiva cabinet” . I trestle tables refectory . Johnson made a similar sporting rifle about 1750-B pictures of 5 drawer antique library desks and tables . Griffin had a shop in Bond Street from 1739 to 1773-Apart from the superlative quality of his arms, his chief claim to fame is probably a breech-loading carbine which will be described later 18th century mahogany wine cooler with brass feet . He also made fine holster pistols with silver mountings antique 1960’s table cigarette dispenser . Under the later name of Griffin and Tow their manufacture was continued till 1796 2009 chinese porcelain antique . The small `IG’ on a Griffin forged barrel was a hallmark of excellence countries where art deco was very popular .
William Ketland was one of the most famous of gunsmiths antique inlaid pembroke table . He started making guns in Birmingham in 174o, and was primarily responsible for establishing the town’s reputation for the manufacture of firearms 18th century writing table cabriole ball claw feet . Ketland was one of the greatest makers of Brown Bess muskets, and other ‘Brown Bess’ arms, for the Government furniture . In 176o a shop was opened antique chinese display stand dealers . in London r dubarry art deco . After William Ketland’s death one of his grandsons carried on the business as Ketland & Co angouleme guerhard . until his own -death in 1804, His brother-in-law, Thomas Izon, continued under the same name until in 1831 financial difficulties led to the firm closing american tripod tables . Old William Ketland is still commemorated, however, in the Birmingham Proof Mark imperial drop leaf antique table . In 1813 the Gunmakers’ Company of London tried to get a Bill through Parliament to compel every gunsmith to mark his firearms with the place of manufacture italian buffet furniture . The reason for this was that firearms marked `1,n don’ coiamat,ded a higher price than those made elsewhere night chamber pot . Some Birmingham makers had accordingly succumbed to temptation and put ‘London’ on their own arms pictures of yellow antiqued cabinets . The public implication that Birmingham arms were inferior to those of London make, however, annoyed the better Birmingham gunsmiths, and they formed a Guild to protect the standard of the products of their own town art deco french inspired dresser . This new Guild was called ‘The Guardians of the Birmingham Proof House’ antique campaign chair with lion paws . The proof house mentioned in the title was set up at the same ‘ time lion feet table . Ketland & Co turn tripod into table . had taken a prominent part in this movement and the proof mark adopted was an adaptation of the arraourer’s mark of two crossed sceptres, used by old William Ketland antique stores brass ashtrays made in china . The Birmingham viewer’s mark, stamped on the barrel after testing in the rough, consisted of the crossed sceptres between a crown above and a V below antique mushroom shaped table lamps . The proof mark for the finished barrel again had the crossed sceptres and crown, but in place of the V in the bottom angle, there were the letters B, P and C: the B and C being in the flanking angles and the P in the base andre hunebelle glass .
The two generations of John Richards, who covered the years 1745 to 1810; had shops in both London (in the Strand) and Birmingham for sale louis 16th walnut sideboard cabinet . They made an odd weapon, not uncommon at this period,•which was a bell muzzle flintlock pistol with a small bayonet under the stock which sprang into position on odiot tureen . releasing a spring antique clerks desk . Owing to the number of times a flintlock missed fire it probably had an appeal as providing an emergency weapon for close combat “english ironstone”+england”+marks .
One of the most famous of London gunmakers had the peculiar name of Durs Egg antique bentwood chaise . Business was carried on under that name from 1770 to x834 “alexander roux” pietra . It was then changed to D antique mahogany chippendale dining table . I meissen cris de paris . Egg (probably by a son or nephew) and lasted as such till 1865 antique oak drop leaf end table . Egg had a shop for the sale of private arms at No antique spring loaded drawer arm . x Pall Mall mid eastern style shell drawer . He had a Government contract for muskets and carbines, and made a large number of the Ferguson rifles queen anne gate leg table 18th century . In addition, he made a smooth-bore flintlock breech-loading carbine of his own design antique empire mahogany curved buffet with mirror . This was actually adopted by the Government and issued in large numbers to the cavalry towards the end of the century sheraton occasional table . It had a hinged chamber which was tipped up to receive the charge duncan phyfe buffet with legs . It had the advantage that since the chamber was loaded from its front end it could be loaded with the same cartridge as was issued for muzzleloaders antique oak and fabric dressing screen with fretwork . After loading, the chamber was lowered again and locked in position by giving a quarter turn to a steel bar which pivoted on the top of the chamber and engaged in two slots mid century antiques and porcelain tea sets .
This Egg carbine was capable of a fairly rapid rate of fire walnut veneer wardrobes art deco . To load it entailed only the simple operations, which could be performed on horseback, of tearing the cartridge, priming the pan, opening the breech, inserting the cartridge in the chamber, and finally closing the breech antique oak tables with leaves . Good as it was, however, the breech mechanism did not provide a gas-tight joint and there was thus a considerable escape of flame french clothes designers during 17th century . The reason for this was that there was only surface contact between the faces of chamber and barrel fauteuil bureau .
That such a carbine was required for cavalry use is shown by a passage from Captain Hinde’s The Discipline of the Light Horse antique wood inlayed wine cellaret . Hinde says:
`As light troops are more intended to act loose than in bodies, their principal practice should be to acquire personal address, viz escritoire antique . to manage the horse well, to use the sword with dexterity, and fire the carbine with great justness steele art deco chair wood arm rests . The proposal of Monsieur de Saxe, for loading at the breach of the carbine, seems well calculated for the fire arms of cavalry, if it will not make them too complicated (the author once saw a carbine belonging to a brother officer, made according to this proposal of Monsieur de Saxe; to be loaded, it was held firmly in the left hand, as when it was presented to be fired, and about the same place; then with the right hand the guard over the trigger was pulled back, on which the but of the carbine dropped down, hanging by a pin, and discovered the breach of it quite open; in a cartridge box he carried nine iron tubes loaded, one of which he thrust into the barrel, and directly with his right hand pushed up the butt, which made a click, and securely shut up the breach british longcase makers . On striking the lock with his hand the piece primed it self, and he fired without missing fire at any time art deco dinner service . He loaded his iron tube or cartridges without any rammer, with his finger shoving down powder, ball, and paper india old antique dining table . I think he told me Mr Griffin, gunsmith, in Old Bond-street, was the maker of it, and the officer had himself invented it, as he was a very mechanical ingenious gentleman, and an horse officer) the ramrod is apt to be lost, and at any rate is very difficult to manage on horseback, whereas a chamber with a fresh charge, could easily be introduced; but of this, the period preceding art deco .Mr Barbor, or any other gunsmith, can give the best account “art moderne” furniture . The objection of expense should not be admitted, for economy in the price of arms is, at best, very injudicious “bristol porcelain” for sale 18th century .’
The ‘Barbor’ mentioned by Hinde is probably I antique sideboard cabriole legs . Barbar who had a shop in London, from 1740 to 1780, in Shoe Lane antique ivory sofa table . The firm, however, seems to have been in existence since the beginning of the century, and to have been one of the foremost in fine decorative work marble table inlaid antique .
T tudor rose design waterfall furniture . Twigg was another well-known London gunsmith of 176o to 1780 designs for dressing table glasses . The firm was carried on from 1780 to 1783 as Twigg & Bass; and then reverted to Twigg only again from 1783 to 1813 antique mahogany card table, imperial . Twigg made Government flintlock holster pistols, and also flintlock holster pistols for officers which were of very fine workmanship art deco examples . His most noteworthy contribution to gunmaking was a number of different designs of multi-shot flintlock pistols chess table spiral legs . One of these was a seven-barrel pepperbox type of weapon, the barrels of which were rotated by hand after each shot joan klock, amsterdam, clockmaker . Some of his pistols had the under spring bayonet, which was released by sliding back the trigger guard jupe dining table’ . Twigg had a foreman named John Manton, who founded his own business at about the time Bass was introduced into the partnership antique enamelled glass . Manton, too, became a famous gunsmith, but he belongs more to the; nineteenth century and will be dealt with more fully in a later clawfoot antique lowboy . chapter 19th mahogany clerks desk .
John F satinwood commode john cobb . Probin of the Minories in London, 1780 to 1831, made flintlock holster pistols and carbines under Government contract meissen porcelain louis xiv . He also made pistols for officers, and there is, in the museum of the Royal United Service Institution, a pair made by him for General Sir Thomas Picton and carried by him in 18 r 5 antique walnut gateleg table . They have J neoclassical dressing table . Probin’ on the lock plate, and along the top of the barrel ‘Probin Maker to His R H the Prince of Wales’ delicate leg drop leaf table .
One of the troubles experienced with eighteenth-century flintlock weapons was failure of various parts of the mechanism due mainly to rusting glass supper table . Military locks were strongly made to withstand the rough usage which they inevitably experienced, but they could not be made waterproof antique porceline candle sticks . As a result regiments frequently suffered a serious loss of fire-power through draw leaf table northern furniture company . the number of muskets which were out of action owing to mechanical faults neo-rococo rockingham lamps . Rusting particularly affected the small moving parts of the lock, and the screws which held the various components together designs of arcs and pillars . The most serious breakages were the screws, for the rusted pieces were often so firmly imbedded that it was beyond the powers of the regimental armourer to remove them coalbrookdale neptune dish . The trouble caused considerable concern and gunsmiths were encouraged by the Government to offer suggestions 1800’s furniture makers .
The first to give a practical response was Jonathan Hennem, who submitted a design for a screwless flintlock musket to the Board of Ordnance on the 2nd May 1781 18th century card table . The Board appear to have been favourably impressed, for they directed `that two Musqueis be delivered to John Hennet [sic> for him to alter according to his proposal’ english baroque pottery . Arrangements were made for Hennem to carry out experiments near Woolwich, and he was engaged on these for the next two years antique meets modern furniture . Trials were apparently concluded successfully by the 18th October 1783; for on that date the Master-General of the Ordnance issued instructions to the Board ‘That zoo locks be provided by Mr imperial gateleg table . Hennem of his own Construction and that an Imprest of C70 may be granted to him towards Compleating the Order, the said Locks being found of great Utility in his Majesty’s Service’ swiss walnut art deco motif .
A short time later a celebrated London gunmaker, Henry Nock, made an apparently surprising intervention clear glass trinket boxes or powder boxes . On the 8th November 1783, he presented a bill for twenty’Musquet locks of Hannim’s Construction’, for which he charged 9s utensils used in britain for cooking . 6d paris style art deco desk . each sheraton +antique +gaming table . In view of the 18th century austrian porcelain . fact that Nock himself, as will appear later, was engaged in somewhat similar experiments he may well have taken Hennem under his financial wing leather revolutionary war writing box .
Finally Hennem sent in 400 locks, or four times the original order, and was consequently able to lower the price kedleston hall birds . Of these 400, 201 were coloured black and 199 were polished, presumably for comparative trials cedar chest genoa 16thc .
The 2oth Foot (now The Lancashire Fusiliers) was chosen to carry out trials with the Hennem locks 1900 era drop leaf gate leg table . The regiment was about to embark for Ireland on active service and it was already short of muskets; though if these were the reasons for issuing it with new and untried weapons, the former particularly seems to have been a pretty weak one art deco stemware . Anyhow, they received 308 of them, and in July 1784 Hennem was given permission by the Commanding Officer to instruct the men in the use of the locks the development of art deco . Hennem duly arrived at Plymouth only to find that the regiment had left for Ireland ming porcelains . He then obtained permission to follow it, with the proviso that his stay in Cork must not exceed three weeks fiddle shape flatware . This limitation proved, however, impracticable, for the 2oth was split up over southern Ireland in widely scattered detachments, and the roads and unsettled conditions of the time made travel slow and hazardous glass/wood art deco designs .
There was little in the appearance of Hennem’s lock to differentiate it from the ordinary flintlock bugatti furniture range . There were no screws, of course, and the mechanism was secured by pins riveted to the lock plate islamic influence 18th century . By means of a tool which Hennem called a ’spring lifter’, the lock could be completely dismantled in a few seconds antique trends .
The improvement of the lock of the matchlock musket, which is referred to in this list, and some of the various accessories are discussed later. There are certain other- points worth noting.
The prices quoted show that firelocks (i.e. wheel-locks) -were much more expensive than snaphaunces (the name” applied at the time to any type of flintlock). A pair of wheel-lock pistols are priced at C,3, whereas flintlocks cost only &; and a wheel-lock arquebus was (1 16s. as compared with Cr for a flintlock carbine. The new type of matchlock musket was considerably cheaper than weapons with the spark ignition locks, for it could be purchased for 15s. 6d.
It is of interest that the proving and subsequent stamping of firearms had to be carried.out free of charge. The cost, no. doubt, was borne by the committee of gunmakefs; and it was probably considered that they were amply compensated by the elimination of competition from the sale of cheap and unserviceable arms.
The Commission of 1631 led six years later to the incorporation by Charles I of the Gunmakers’ Company of London as a permanent body. The aims of the Company were to protect the skilled gunsmiths from such unskilled competitors as blacksmiths, and from price undercutting ftom the import of cheap foreign arms; ‘that they may be the better enabled at all times to furnish Us and our-Subjects with good serviceable Handguns for Military Service and otherwise and to settle a better form of Regulation and Government of the said Art and Mystery’.
The original members of the Company were sixty-three in number, starting with ‘Henry Rowland our now Gun-Maker’, who had been the first mentioned of the seven gunmakers of the 1631 Commission.
There were to be ‘two or more of the said Company chosen to assist for the searching viewing gaging proving making trial marking or stamping of Handguns’.
They had the power to punish the ‘uttering of unartificial unmerchantable bad and deceitful Guns or parts of Guns or Guns made of ill materials whereby our Loving Subjects may be damnified or endangered’.
The proof was to be ‘with good and sufficient Gunpowder the weight of d Bullett of Lead sizeable to every several Gun be it greater or lesser according to the Bore of the Piece together with the said sizeable Bullett and rammed with paper before and after the Bullett the Charges of which said Proof and trial in the powder paper Bullett Shot and fraying powder for firing to be necessarily used therein to be always provided defrayed and born by the Makers or Owners of the same Guns’.
The stamp to show that a gun had been proved was to be
Cone Stamp or Stamps to be engraved with the letters G.P. 0
crowned’; and this was to be used to ‘mark or stamp all such Handguns Daggs Pistols and parts of Guns only as upon search view gage tryal and proof shall be found sufficiently serviceable and of good materials’.
The proof referred to above consisted in the gun barrels being fired with the test charge, first in the rough and then in the finished state, The ball was the standard size for the gun, but the powder was double the normal charge. The barrels to be proved were laid in racks with their muzzles towards a bank of sand. From twenty to a hundred were fired at a time by laying a trail of gunpowder which ran down the line of barrels across their touch-holes. After each proof the barrels which had passed the test were stamped with the marks of the Company. The mark’ for the first proof, to show ‘that the barrel had been tested in the rough, was a crown over the letter V. The mark indicating that the barrel had survived the second proof, of being tested in its finished state, was a crown over the letters G.P. (for ‘Gunmakers’ Proof’).
Under the original Charter of 1637 the right of proof vested in the Company applied only to weapons sold within ten miles of the City of London. A great number of arms, therefore, were both made in England and imported from the Continent without having been submitted to the proof; and most loving subjects continued to be damnified by bad and deceitful guns. This omission was subsequently rectified in the reign of Charles II, when a new and amplified Charter was granted in 1672. This forbade the sale of unproved firearms throughout England, and laid down that the only acceptable evidence of proof were the Company’s marks.
In about 1630 improvements were made to the mechanism of the matchlock musket, which was, of course, the standard infantry weapon. The flash-pan, with its cover, and a short shield to protect the eye of the musketeer from the flash of the priming powder, were attached to the lock. In addition, the scear and serpentine (which was now known as the ‘cock) were actuated by a separate trigger, instead of the long crossbow pattern trigger, or ‘tricker’, with its rigid attachment to the scear. These alterations made the matchlock a much better weapon, and gave the English some b advantage over Con- tinental armies, in most of which the old lock was retained till the end of the century. There were other gradual improvements and alterations to the musket during the first half of the seventeenth century. Progressive modifications to the stock eventually resulted in a form which bore some resemblance to the weapons of today. The balance of the gun was brought further back towards the rear, by lightening the barrel and reinforcing.the breech; thereby making it easier to dispense with the rest. The bore of the barrel was standardized at io, and this was designed to provide an easy fit for a i 2-bore bullet. The outside of the barrel was protected against rust by ‘russeting’; an ancient process which had been used to protect the steel-work on hafted weapons, and involved coating with some dark pigment.
Certain accessories were used with the musket at this period. They comprised: a wooden ramrod, with a horn or bone tip; a cleaning tool, known as a ’scowrer’; a tool for extracting bullets, called a ‘worm; an iron-shod musket rest; and a bandolier incorporating a set of twelve wooden chargers, each holding sufficient powder for one bullet. The rest in point of fact was now seldom used, and rarely carried on active service. It was retained as part of the musketeer’s equipment for many more years; presumably because its use added considerably to the accuracy of fire. On the other hand it was a nuisance on the march, and impaired individual mobility in action.
The matchlock was now no longer used for cavalry firearms, and all pistols and carbines were either firelocks (i.e. wheel-locks) or flintlocks.
The design of firearms was, and always has been, intimately connected with the quality of the gunpowder. The first gunpowder used consisted of equal parts of saltpetre (a chemical compound composed of nitric acid and potash), sulphur and charcoal. In the early days this was in the form of a meal, or fine powder.. In the fifteenth century the proportion of saltpetre was much increased, and the respective quantities became saltpetre eight parts, charcoal and sulphur three parts each. The hand-gun now became a practical proposition, whereas the old powder had only been suitable for cannon. At the beginning of the sixteenth century the saltpetre was again increased, the new proportions being four parts of saltpetre to one each of charcoal and sulphur. This change vastly increased the use of the arquebus.
The chief disadvantage of the meal gunpowder was the lack of air space acid consequent slow combustion. In i 52 `corned’ gunpowder was introduced. This was made by pounding the meal powder into a solid cake and then breaking it up into grains. This not only gave the required air space, but it also resulted in a better mixture of the components. The new powder- was still far short, however, of what was required. The grain was coarse and there was still too much charcoal and sulphur. Further, the saltpetre itself was full of impurities. Compared with later gunpowder, therefore, it was still relatively slow burning and a large charge was required. These deficiencies in speed of combustion and propelling power made it necessary to have a long barrel if the full strength was to be developed by the time the bullet left the gun. During the sixteenth century some improvement was effected by increasing the proportion of saltpetre to five parts to one part of each of the others.
The Civil War in England between Ying and Common–wealth was in one respect a turning-point in our military history; for it was the first conflict in which firearms exercised at least as much influence on the battlefield as shock weapons. The infantry arm was still the matchlock musket, with its original barrel length of 48 inches. The bore, however, had been reduced to the so-called ‘English’ bore, or 12.
In addition to the matchlocks there were a certain number of flintlock muskets. Some of these had the English lock with the steel and pan cover in one piece; others had the old snaphaunce lock with separate steel and pan cover. These latter -were almost certainly imported from the Continent. The barrel of both these flintlocks was 421 inches, .or Sl inches shorter than the matchlock.
A third type of flintlock in use was a conversion from the old arquebus. The barrel was only 4o inches long, but it was an unbalanced weapon, mainly owing. to its very light butt.
Cavalry firearms were either flintlocks or firelocks (wheel-locks). Heavy cavalry carried pistols and sometimes carbines. The Dragoons had their dragon, but this peculiar weapon was probably already being replaced by some sort of light musket, i.e. musketoon, carried hooked to a shoulder belt by runner and swivel.
The circumstances under which the Civil War was fought and the inevitable.shortage of arms resulted in a large number of sporting and other private arms being used on both sides. It was owing to the use of these private weapons that rifled firearms were first issued to English troops. Sharpshooters in particular were frequently armed with sporting rifles and the more accurate fowling-pieces. In his account of the defence of Lathom House by the Countess of Derby in x644, Bishop Rutter says:
`Upon the top of the towers were placed the best and choicest marksmen, who usually attended the Earl in his hunting and other sports as huntsmen, keepers, fowlers and the like, who continually kept watch, with screwed guns (rifles) and long fowling-pieces, to the great annoyance and loss of the enemy, especially of their commanders, who were frequently killed in their Trenches, or as they came or went to or from them.’
The first rifled barrel was probably made as early as 15 zo by Augustus Cotter at Nuremberg. The idea of spinning the bullet is believed to have been inspired by the effect of feathering an arrow, with the obvious hope that the appallingly inaccurate firearm of the day might be made to shoot as straight as the bow and arrow. However, although rifled arms were used in Europe during the second quarter of the sixteenth century, there was no real military requirement for them. For the close-order tactics of the day and for another three centuries the smooth-bore firearm gave adequate results. For sporting purposes, however, there were obvious advantages in having the most accurate firearm possible.
The rifles used in the Civil War were probably wheel-locks of German make. The bullets for these weapons were spherical, and were rammed down the barrel wrapped in a greased rag to make them a tight fit in the rifling.
Shortly before the start of the Civil War a breech-loading rifle appeared in England which was destined to be the standard sporting rifle for the next one and a half centuries. It is likely, therefore, that some arms of this type were used in the fighting. The bullet of a breech-loading rifle was cast somewhat larger than the bore, and therefore was gripped more securely by the grooves than the muzzle-loaded bullet in its greased patch. Breech-loading rifles were, however, considerably slower to reload than muzzle-loaders, so that they were not popular weapons for close-order fighting.
There were two methods of breech-loading; one of which was based on a detachable barrel, and the other on a threaded iron plug. In the first method the barrel was unscrewed from a fixed breeching or chamber, and the latter was loaded with the powder and bullet. In the second method a hole was drilled in the breech which was closed by a screw plug. The powder and then the bullet were inserted into the chamber through this hole.
MUSKET AND PIKE
An attempt to produce some order in the manufacture of firearms had an odd terminological result. In the army of Piedmont, before the battle of Moncontour in 1569, there were so many sizes of bore amongst the arquebuses that ammunition supply became a difficult problem. To overcome this 7000 arquebuses were ordered of one calibre, and referred to as ‘harquebuze de calibre de Monsieur le Prince’. The type of arquebus which was made to comply with this order had a bore of 10 or 11, weighed 12 pounds and had a barrel length of 42 inches. It became so popular that its use on the Continent became very widespread, and it appeared in England during the last quarter of the sixteenth century.. The original cumbersome reference had been contracted by the soldiers to `Calibre du Prince’, and later simply to ‘Calibre’. This became anglicized as ‘Caliver’, and in 1578 the Tower of London had 7000 of them in store. They were matchlocks, rather. heavier than the previous pattern of arquebus, and about four feet ten inches in overall length. Eventually the term came to mean any firearm which was light enough to be fired without a rest. ‘Arquebus’ was then frequently applied to cavalry wheel-lock arms.
In 1595 the Trained Bands were ordered to exchange their bows for calivers and muskets, and by this time calivers formed part of the armament of every English infantry unit. In fact, in a levy for Ireland of the following year, the ’shot accounted for half the infantry, and of these three-quarters were armed with calivers and only one-quarter with muskets. The days of the caliver, however, were numbered; for, unlike the musket, its shot was too light to pierce heavy armour.
The musket was actually earlier in origin than the caliver, having been invented in about 1546, though its adoption in England was somewhat slow. It was, essentially, an improved form of matchlock arquebus, with a greater g rane and accuracy and firing a heavier
rang
It had a barrel 4 feet long, a bore of 8 or io, and was designed to penetrate the heaviest protective armour. Its weight was 2o pounds, and it was consequently necessary to support the barrel on a forked rest. The first type of musket seems to have been too cumbersome to use for anything except siege warfare, and the Duke of Alva has been stated to have been the first to adapt it for use in the field, in his campaign in the Netherlands in
1567. By the time of the Civil War the musket had been considerably lightened, and it was possible to use it without a rest.
In one respect the musket was destined to achieve undying
FIG. 41. A MATCH-BOX.
fame; for its name came to denote any shoulder firearm, and even ‘rifle’ is merely a shortened form of ‘rifled musket’.
One of the disadvantages of the matchlock was the match. In very wet weather it was liable to be extinguished. To give some protection a ‘match-box’ was introduced. This was a tube of pewter, latten or tin, about a foot long, with holes in the side to let in aif.
It was this difficulty with the .match which was responsible for the development of spark ignition. The first substance to be employed for this purpose was pyrites; a mineral which included a combination of iron and sulphur. The mechanism in which it was used was known as the ‘wheel-lock’, and was invented in Nuremberg about 1517. A fragment of pyrites was held in contact with a steel wheel which had a serrated
FIG, 42. WHEEL- LOCKS.
Top: A Wheel-lock Carbine, Elizabeth I. Bottom: A Wheel-lock Dag, Edward VI.
edge. The wheel was rotated by the release of a powerful V-spring attached to the lock plate. The resulting stream of parks was directed at the priming powder.
The spindle of the wheel had a square end, and the lock was set by fitting a key, or spanner, to the spindle and winding it in a clockwise direction. This pulled a short chain of about three links round the spindle, and tautened the spring. After a three-quarter turn a scear (spring catch), which was fixed on the inside of the lock plate, engaged a slot on the wheel.
The flash-pan was then primed and closed. The bottom of the pan, however, was pierced to admit the top of the wheel. The piece of pyrites, which was held in a clamp at the head of the cock, was next lowered on to the top of the pan cover. Assuming it to have been loaded, the weapon was now ready for firing.
Pressure on the trigger drew back the scear and released the spring, causing the wheel to revolve. An ingenious device then caused the pan cover to open. A cam attached to the wheel spindle struck an arm which was connected to the pan cover. This opened the latter, permitting the pyrites to fall on the wheel. The pan cover was then held open by a spring catch.
The wheel-lock was, as may be imagined, an extremely
FIG. 43. WHEEL-LOCK DAGS.
expensive firearm to make, particularly when compared with the simple matchlock. Its adoption in England was consequently slow, and it never became a general issue to the infantry. It was a very useful lock, however, for a horseman. The management of a matchlock on horseback was a difficult feat, for the match had to be kept alight and any adjustments made to it with one hand.
The first single-handed firearms were intended for the horse soldier. These were the dags or tacks, the forerunners of pistols. The first dags were, in appearance, small arquebuses with wheel-locks. In 1544 they were introduced into England as a cavalry weapon.
The wheel-lock, also known as a firelock, suffered from two disadvantages; the first was the expense, and the second the weakness of the pyrites, which was liable to break into pieces. The demand for a sound and inexpensive method of spark transmission led to the introduction of the flintlock. The name originally given to this new mechanism was ’snaphaunce’. This was derived from the Dutch snaphaan, meaning a pecking fowl, and referred to the pecking motion of the cock.
The sparks in the flintlock were produced by striking a piece of flint against a case-hardened steel plate, with serrated ridges on its face. The flint was held in- a clamp at the top of the cock. The ’steel’, against which the flint was struck, worked on an arm which was hinged to the lock plate and held in position by a V-spring. To fire the weapon the cock -was drawn back, thereby compressing the main spring, which in turn actuated an internal tumbler connected to the cock. The scear engaged the tumbler and held the cock in the fully open position. The steel was then lowered towards the rear of the piece and on to the lip of the flash-pan; bringing it within range of the cock. Pulling the trigger drew back the scear, thereby releasing the cock; with the result that the flint struck the steel, directing a stream of sparks into the pan. This last was uncovered, during the forward movement of the cock, through a tumbler actuating a steel link which thrust against the lower part of the pan cover.
This type of flintlock was complicated and still fairly expensive. It was little used in England, though some of the troops ordered to Ireland in i58o are said to have been armed with it. On the Continent, however, it was in common use for a long time. In England it was superseded in the first quarter of the seventeenth century by the so-called ‘English lock’ flintlock. This was a much better and simpler weapon than the original snaphaunce, and the mechanism remained basically the same for all future flintlock firearms.
In the English lock the steel and pan cover were combined in a single piece which was called the ‘hammer’. This consisted of a hinged pan cover which worked upon a screw set in the lock plate and held in either the open or closed positions by a V-spring. The steel, or striking surface, rose approximately at right angles in a curve from the free end of the cover. When the cock was released the flint hit the steel, causing a shower of sparks, and at the same time pushed the whole member back on the hinge, so uncovering the priming powder to the sparks. The firing mechanism was practically the same as that of the snaphaunce, but the weapon could be put at safety by raising the cock half-way and leaving the pan
FIG. 44. AN ARQUEBUS WITH SNAPHAUNCE LOCK.
closed. This “half-cock’ position was achieved by providing a notch on the tumbler in which the scear engaged.
On some English locks there was an additional safety device. This was a catch on the outside of the lock plate which engaged in a notch on the cock when it was in the `half-cock’ position. This type of safety-catch was called a dog-catch and locks so fitted were known as doglocks.
Although the term `snaphaunce’ seems to have been applied originally to those flintlocks with separate pan covers and steels, it appears to have been soon used, in the early seventeenth century, to denote all flintlocks.
The difficulty of managing a matchlock on horseback has already been mentioned. Nevertheless in about I 53o a modification of the arquebus was produced for this purpose. It was called a ‘Petronel’ or ‘poitrinal’, names derived from the French and signifying that the weapon was intended to be fired from the chest. It was shorter than the arquebus but of a large calibre, and, on account of its weight, was carried on a broad shoulder belt. As a matchlock it was a fairly impracticable weapon, and later -versions were fitted with wheel-locks.
Another horseman’s firearm was the dragon. This was something between a petronel and a pistol. Traditionally it had a. dragon’s head at its muzzle, and it is supposed to have given its name to the French Dragons (Dragoons), first raised by Charles de Cosse, Marechal de Brissac, in 1600. Of the later and similar English troops, Markham, in his Souldier’s
FiG. 45- PETRONELS.
Acidence of 1645, says: ‘The last sort of which our horse troopes are composed are called dragoons, which are a kind of footmen on horsebacks, and do now indeed succeed the light horsemen, and are of singular use in all actions of warre. The armes defensive are an open head piece with cheeks, and a good buffs coat, with deeps skirts; and for offensive armes they have a faire dragon fitted with. an iron works, to be carried in a belt of leather, which is buckled over the right shoulder and under the left arms, having a turnill of iron work with a ring, through which the piece runnes up and downs; and these dragons are short pieces of sixteen inches the barrell, and full musquet bore, with firelocks or snaphaunces, also a belt with a flaske, pryming box, key, and bullet bag, and a good sword.’
In the heavy horse petronel and dag were succeeded in due course by carbine and pistol. The difference between a pistol and a dag is, however, not very clear. Weapons which we should normally call pistols were often called dags in England and tacks in Scotland in the early seventeenth, and, in the case of the latter, eighteenth centuries. Owing to their small size,. and consequent popularity as a personal weapon; pistols from very early days seem to have expressed tastes in design and decoration of different gunsmiths. In addition, there have
FIG. 46. A DRAGON.
frequently .been fashions in pistol design which gunsmiths have met in their own particular style: To describe all the pistols which have been used in war would, therefore, be quite beyond the scope of the present work. Nevertheless there are two special types which must be mentioned. The first of these is the screw-barrel pistol. This had a cannon-shaped barrel ‘which screwed off so that the charge could be loaded direct into the breech piece. These enjoyed a great vogue during the reign of Charles I and for some time afterwards. The second is -one of the most famous pistols, or rather -family of pistols, ever made.. This was the Scottish all-metal pistol, which, as far as is known, was first made towards the end of the sixteenth century. The earliest one on record was manufactured byAlison of Dundee. The principal difference between the Scottish pistol and others was that the stock was made of steel or brass instead of wood. The butts of the earliest models had a fish-tailed end, and they were sometimes made of wood encased in, or mounted with, brass or silver.
The early seventeenth-century carbine, according to a 1630 book on cavalry by Captain Cruso, was the same length as an arquebus but had a smaller bore. It was a flintlock, and it was slung from a shoulder belt by a swivel.
There were two disastrous expeditions during the reign of Charles 1, the failure of which was to some extent due to defective firearms. In the force sent to Cadiz, in fact, the majority of the firearms are said to have been either defective or useless. As a result of these deficiencies a special Commission under the Privy Seal appointed a select committee of gunmakers, arniourcrs, pikemakers and bandolier makers, `being the skillfullest and prime workmen of this land’, to undertake an investigation into the arms of the national militia and Trained Bands and to rectify any deficiencies. The London gunmakers mentioned as being on the Commission were Henry Rowland, Richard Burrowe, Thomas Addis, John Norcott, William Dawstin, John Watson and William Graves. These gunmaker members were temporarily vested with powers of proving and testing firearms.
Nevertheless Henry did his best to ensure that, in spite of the increasing use of firearms, there should remain a large reserve of trained archers in the country from whom he could raise the bulk of his infantry in the event of war. In a new statute of 154:1 the vast majority of the male population between the ages of seventeen and -sixty were required to exercise themselves in archery and to be in possession of a bow and arrows. This was an even wider age limit than was laid down in the statute of 1511. At the same time the use of firearms was limited to certain persons and occasions as follows: ‘It shall be lawful, from henceforth, to all gentlemen yeomen, and servingmen of every lord, spiritual and temporal, and of all knights, esquires, and gentlemen, and to all the inhabitants of cities, boroughs, and market towns, of this Realm of England, to shoot with any hand-gun, demihake, or hagbut, at any butt or bank of earth, only in places convenient for the same: so that every such hand-gun, etcetera, be of the several lengths aforesaid, and not under. And that it shall be lawful, to every of the said lord and lords, knights, esquires, and gentlemen, and the inhabitants of every city, borough, and market town, to have and keep in every of their houses such hand-gun or hand-guns, of the length of one whole yard, and not under, to the intent to use and shoot in the same, at a butt or bank of earth only, as is above said, whereby they and every one of them, by the exercise thereof, in form above said, may the better aid and assist in the defense of this realm, when need shall require.’
There were many to lament the passing of the bow. In 1549 Bishop Latimer, preaching before Edward VI, denounced the vices of the age, and advocated, as a method of combating
FiG. 22. ARBALESTIERS.
The process of loadin,-, is clearly shown. Note the use of the windlass.
them, a return to the noble and manly pastimes which had been practised in his youth. He said: ‘In my time my poore father was as diligent to teach me to shoote as to learn * me any other thing; and so I think other men did their children. He taught me how to draw, how to lay my body in my bow, and not to draw with strength of arms, as other nations doe, but with strength of the body. I had my bowes bought me according to my age and strength, as I increased in them, so my bowes were made bigger and bigger, for men shall never shoot well except they be brought up in it. It is a goodlie art, a wholesome kind of exercise, and much commended in phisicke. As late as z 55 there is a record in the Venetian State Papers of an appreciation of the English archers by one Giovanni Michele. He says: ‘. . . they, to say the truth; being. most expqrt archers, so that they would not yield to any other people more trained and experienced then they are; and such is their opinion of archery and their esteem of it, that they doubtless prefer it to all sorts of arms, and to harquebuses, in which they trust less, feeling more sure of their bows and arrows; contrary, however, to the judgement of the captains and soldiers of other nations. They draw the bow with such force and dexterity at the same time, that some are said to pierce corslets and body-armour; r; and there are few among them, even those that are moderately practised, who will not undertake at a convenient distance, either aiming point-blank, or in the air (as they generally do, that the arrow may fly further), to hit within an inch and a half of the mark.’ With moulinet or windlass.
The cross-bow was a mechanical
version of the bow, which was far more popular than the latter on the continent of Europe, but which was little used in England. It had neither the range nor speed of discharge of the long bow, but, on the other hand, comparatively little training was required to enable a soldier to handle it reasonably effectively.
There were two kinds of cross-bow: the arbalest, which was a heavy weapon, and the latch, which was much the lighter, and the more popular in England. The bow of the arbalest was generally of steel. This was strained by means of a small windlass, which fitted on to the end of the butt, and wound up a .tackle which was hooked on to the bow-string. At the foremost end of the arbalest was a stirrup which rested on the ground during this operation, and in which the foot was placed to hold the weapon steady. The windlass and tackle when not in use were carried slung from the waist belt. The arbalest was held in tension, and the bow released by means of a ‘lock’. The early cross-bow locks varied considerably in design. They were not built up on a plate like a gun-lock, but consisted of mutually independent levers set on
FIG. 26. A LATCH.
Elizabeth I.
to the tiller or stock. The lever pivots were pins which passed through the stock from one side to the other. In the sixteenth century the type of lock was introduced which was to be used for many centuries on firearms. In this the mechanism was built on to a plate which was fixed to the stock. The release was actuated by a ‘tricker’, or hair trigger.
The latch was a much lighter weapon, and it was bent by a windlass of much simpler form than that employed for the arbalest. This was the ‘goat’s foot’ lever which worked by means of a cog and ratchet.
The early firearms were more useful for their moral effect than for any damage that they caused; and throughout the mediaeval period the personal, or hand, firearm played a sub-sidiary r6le. The noise and smoke were most impressive; and in the earliest and most inaccurate days there was, from the user’s point of view, a comforting theory that the wounds they caused were poisonous and incurable. Soldiers armed with
FiG. 27. LATCH.
Elizabeth I.
hand-guns would, indeed, need some comfort, for they must have been fearsome weapons to fire, and the observable results extremely disappointing.
0
Hand-auns of sorts were in use in the fourteenth century, for Froissart mentions their use in an English force commanded by Sir John Chandos in 1369. These were probably very small weapons mounted on the end of a long shaft; for a bill submitted a few years later by William de Sleaforde, Keeper of the Privy Purse, includes the sum of thirteen shillings for fitting eight guns with helves, in the same manner as pikes. The helve, or shaft, was used to give support to the gun, and was generally stuck into the ground at a low angle. To give horizontal fire it might be hooked on to a wall or tree, the front
end being supported by a forked FIG. 30. A HAND-GUN. rest. The charge was generally
ignited by inserting a red-hot wire through the touch-hole.
In a MS. which is in the British Museum, there is the figure of a soldier firing a hand-gun of a very early form. The MS. is marked `Royal, 15 E IV’, but it is dedicated to Edward V, and must presumably have been completed in 1485. The gun has no stock and is rested on top of the shoulder. It is being fired by applying-a match to the touch-hole, which is on top of the piece. From the attitude of the soldier it looks as if the gun, in its recoil, is likely to prove a far more dangerous weapon to himself than it is to any conceivable enemy This type of gun was, however, already out of date at the time the book was written. The first improvement seems to have been made during the reign of Henry VI, when the touchhole was moved to the side of the barrel, and a pan was secured below the touch-hole to hold the priming powder. Some of
FIG- 32. A HAND-GUN OF 1468.
these guns were turned into dual-purpose weapons by fixing an axe-head to the rear end. By the last quarter of the fifteenth century stocks were being fitted, which enabled the- gun to be held much more firmly and gave the firer some chance of dispatching his bullet in a generally appropriate direction. The butt was, however, held more often between elbow and body than it was into the shoulder. The final improvement to the hand-gun proper was the addition of a cover to the pan to prevent the powder being blown away by the wind.
The match, which replaced the original hot wire, was of cord or similar material which had been soaked in saltpetre or lees of wine. Thus treated, it burnt slowly and was not easily extinguished by inclement weather.
FIG- 33. A HAND-GUN WITH A STOCK.
Although the term ‘hand-gun’ was used to denote a personal firearm until the middle of the sixteenth century, the original crude weapon was replaced by the genesis of the matchlock, when mechanical means were introduced to apply the match to the priming pan about the first quarter of the fifteenth century. This innovation resulted in an enormous improvement in the accuracy of shooting; for the firer could now hold his weapon with both hands, instead of requiring one hand free to apply the loose match. The match was held in a pair of metal jaws, which were brought down on -to the priming pan by raising a long pivoted lever which extended towards the butt. The match holder was called a ‘dog’, ’serpentine’ or ‘dragon’ from its fancied resemblance to these animals.
The matchlock proper was an improvement on the above mechanism, which was now embodied in a ‘lock’. The match was held in the forked holder, or ’serpentine’, by a
FIG. 34. A CALIVER-MAN.
From the Roll of the Funeral of Sir Philip Sydney, 1586.
thumb screw. Linked to the serpentine was a lever, or ’scear’,
which was pivoted inside the lock plate. Raising the rear end
of the scear swung the serpentine over to the flash-pan. The
scear was actuated by a long trigger, similar in form to that of a
cross-bow, which was screwed to its rear end. A scear springwas
fixed inside the lock plate which pressed against the forward
end of the scear, so keeping the lighted match clear of the pan
until the trigger was pressed. The flash-pan was secured to the breech, and was closed by a hinged pan cover. This was always kept closed until the weapon was about to be fired.
The matchlock mechanism was probably suggested by that of the cross-bow. The firearms first fitted with this lock were called ‘arquebuses’; and it has been suggested that the term
FIG. 35. A MUSQUFTUR.
From the. Poll of the Fuxeral of Sir Philip Sydney, r536.
`arquebus’ referred to the lock, and was a corruption of the Italian arcabouza, or ‘bow with a mouth’. When, the first regular unit of English troops, the Yeomen of the Guard, was formed after Henry VII’s victory at Bosworth, one-half of the men were armed with bows and the other half with arquebuses. Of the two the archers were the more-formidable. The effective range of these early arquebuses was only about fifty yards, and they were probably incapable of killing a. man at a greater distance than ioo yards. On the other hand, it was not considered permissible for a fully trained archer to practise at the butts at a shorter range than 22o yards. In addition the archer could shoot six arrows to one shot of the arquebusier. As has already been pointed out, however, it took far less time to train an arquebusier than an archer.
The preparation of the matchlock for firing was, indeed, an appallingly slow business. The procedure for reloading was as follows:
(a) The match, which was lighted at both ends, was removed from the serpentine.
FiG. 36. AN ENGLTSTI MUSQUET.
Elizabeth I.
(b) A charge of powder was measured out from-the powder flask. This was done by reversing the flask and pressing a catch, which allowed the powder to flow into the nozzle of the flask, at the same time stopping up the mouth with a finger. When the nozzle was full the catch was released, this being the requisite charge of powder.
(c) The charge of powder was poured into the barrel.
(d) A bullet was extracted from the pouch and put down the barrel on top of the powder.
(e) A wad of rag, paper or tow was inserted in ‘the barrel and rammed down on top of bullet and powder.
(f) The flash-pan was filled with fine-grained powder from the ‘touch-box’; the cover closed and surplus powder blown away.
(g) The match was put back into the serpentine and adjusted for length. (Adjustments to the match had to be made frequently, or it burnt down too close to the serpentine and went out. The lighted free end was then used to relight the serpentine end.)
The original matchlock arquebus was froze to 31 feet in length overall, with a very short and sharply curved stock. This was intended to be supported against the chest rather than the shoulder. The barrel length was from 24 to 30
FIG- 37. THE HARQUEBUS.
Top: An Harquebus with a Trigger (Henry VIII).
Bottom: The Lock of an Harquebus of a later date with its Serpentine.
inches, and the bore between 20 and 30 (i.e. the number of bullets to the pound).
The different terms used for early firearms are extremely confusing; for not only were different names sometimes applied to the same weapon, but also with the passage of years a name often came to mean something entirely different from its original usage. Thus, ‘arquebus’ and ‘matchlock’ were originally synonymous; but in later years `arquebus’ denoted any light firearm which could be discharged from the breast or shoulder without the use of a rest. Again, ‘hacquebut’ or ‘hakbut’ (and many other spellings) was often used as an alternative to ‘arquebus’, but in earlier times it referred to a firearm with a very curved stock which brought the Ibarrel to eye level. Smaller versions were known as ‘dcmi-hags’ or `half-hackbuts’, and were really a form of pistol.
The introduction of the matchlock marks the close of the
FIG. 38. A D.ENII-FIAG.
mediaeval period, and the approaching end of the superiority of shock weapons. The increasing efficiency of firearms was to result, soon, in the virtual disappearance of armour from the battlefield, and by the latter years of the sixteenth century the bullet had established equality with cold steel.
